WPS Hide Login alternative: switch to BetterShield
To switch from WPS Hide Login to BetterShield, install BetterShield beside it, keep a way back in, preview the import, apply the sign-in address it can match, test a sign-in while both plugins are active, and only then deactivate WPS Hide Login. BetterShield reads the settings WPS Hide Login left on the site, names anything it cannot carry, and never changes the other plugin.
This post is for someone who has already decided to move. If you are still weighing it, how to switch WordPress security plugins without lockouts covers the general order, and Change WordPress login URL explains what a moved address does and does not stop. Here we stay with one move and say what carries over, what to check, and how to undo it. Moving from a plugin that limits sign-in attempts instead? Switch from Limit Login Attempts Reloaded to BetterShield walks through that move.
Quick summary
- The import carries the sign-in address you use today and turns on Dashboard privacy for visitors, so signed-out visits to /wp-admin/ get page not found.
- A preview comes first and changes nothing. It names anything that cannot move, with the reason.
- While both plugins are active, they answer at the same address, so you can test a sign-in before WPS Hide Login is switched off.
- Sign-in changes wait until your way back in has been checked within the last day, so set up recovery first.
- After the move, the same free plugin also limits sign-in attempts and offers two-factor and passkeys.
Why the order matters
For a while, two plugins handle the same sign-in address. If WPS Hide Login is switched off before BetterShield has taken the address over, the address people use stops working and sign-in goes back to wp-login.php. The order below keeps the address answering at every moment, which is the whole point of doing this carefully.
BetterShield also moves a sign-in address only once you can get back in without it. That is why recovery comes before the import in this switch.
What carries over
The list is short. BetterShield imports:
| In WPS Hide Login | In BetterShield |
|---|---|
| The login address it serves | Custom sign-in address, at the same address |
| Signed-out visits to /wp-admin/ shown a 404 | Dashboard privacy for visitors, showing page not found |
| Signed-out visits to /wp-admin/ sent to a page | Dashboard privacy for visitors, showing page not found. The page is not copied |
A few details are worth knowing before you press anything:
- The address must fit BetterShield’s rule: 1 to 200 letters, numbers, dashes and underscores. It can’t be a name WordPress already uses, such as admin or wp-admin, or your decoy URL. It is stored in lowercase.
- An address that can’t come over keeps working while WPS Hide Login stays active, and the preview says why.
- To send /wp-admin/ visitors to a page again, turn Dashboard privacy for visitors off, enter the page’s name under Send signed-out visitors to, and turn it back on.
Nothing else in WPS Hide Login is read or described here.
What does not move, and what BetterShield does not do
- A page for /wp-admin/ visitors. It is not copied, as above. Set it again if you want it.
- An address BetterShield cannot use. The preview names it with the reason. Choose a new address on Login & Access after the switch.
- Other ways to sign in. The address moves only the WordPress sign-in page. A WooCommerce My Account form, XML-RPC, the REST API and application passwords are not affected.
- One address for a whole network. On multisite, BetterShield sets the address for each site on its own.
Before you start: keep a way back in
Sign-in changes in BetterShield wait until you have a working recovery link or an unused recovery code, checked within the last day. BetterShield emails a single-use recovery link to the site’s administration address when you activate it. We recommend checking that the email arrived, and storing the link or your recovery codes outside the site, before you change anything else.
If the address is ever lost, the link, a recovery code or wp bettershield recover turns on safe mode for an hour and wp-login.php answers again. Locked out of WordPress? shows what using it looks like.
While WPS Hide Login is still active
Quick Setup’s Coexistence step has a Sign-in address card with two choices: Use BetterShield or Keep WPS Hide Login.
- Use BetterShield is marked Recommended only when your address can come over right now. Otherwise its note says your sign-in page goes back to /wp-login.php. A supported address can be held until recovery is ready and retried at the end of setup.
- With Use BetterShield chosen, Migrate & Deactivate Plugin starts the handover. In BetterShield 1.1.10, a supported address can be held until recovery is ready and retried at the end of Quick Setup. Complete the flow and test access before closing your current session.
We recommend choosing Keep WPS Hide Login for now and using the import on Settings › General, as in the steps below. Both plugins then answer at the same address while you test. A different address is refused while WPS Hide Login still serves the shared one, so finish the switch before you change it.
Set it up: switch over step by step
- Keep your administrator session open, and write down the sign-in address that works today.
- Install and activate BetterShield, leaving WPS Hide Login active. In Quick Setup’s Coexistence step, choose Keep WPS Hide Login on the Sign-in address card.
- Store your recovery link or recovery codes outside the site, as above.
- On Settings › General, find Move settings between sites and press Preview Import beside WPS Hide Login. Nothing changes yet. If a setting can’t come over, it is listed under Not imported from WPS Hide Login: with the reason.
- Apply the import when you are ready. The button counts the changes, as in Make These 2 Changes. If Check the way back in first opens, press Check Now, or Open Recovery if you have no working link or codes yet.
- In a private browser window, sign in at your address while both plugins are active.
- Deactivate WPS Hide Login on the Plugins screen, then run the checks below.
Switch from WPS Hide Login to BetterShield is the step-by-step reference, and Move settings between sites covers the import screen itself. The WordPress.org plugin documentation explains deactivating a plugin from the Plugins screen.
Check it is working
In a private browser window:
- Open your sign-in address and sign in.
- Sign out and open
/wp-login.php. You should see your theme’s page-not-found view. - Open
/wp-admin/while signed out. You should see “This page is not available.”, or the page you chose. - Request a password reset and check that the email’s link uses your address.
On BetterShield › Protection › Login & Access, the Custom sign-in address row shows On since with a date, and the address with Copy.
What it can break, and how to undo
- Old links. Bookmarks and links typed into menus or pages by hand still point at wp-login.php and now get a 404. Update them before the switch.
- A page cache. With WP Rocket, W3 Total Cache, WP Super Cache or LiteSpeed Cache active, the row asks you to exclude the new address from caching, or the sign-in form may stop working.
- Comments that need sign-in. When only signed-in people can comment, each post’s comment form links to the sign-in page at its new address, and the row tells you so.
- Switching WPS Hide Login off too early. If the address was not brought over yet, sign-in goes back to wp-login.php. Reactivate WPS Hide Login, or bring the address over and test again.
No single step reverses the whole import. Turn off Custom sign-in address under Signing in on Protection › Login & Access, and wp-login.php answers again at once. Dashboard privacy for visitors has its own switch in the same section. Neither reactivates WPS Hide Login: if you want it back, reactivate it on the Plugins screen. Its own settings are never changed by BetterShield, so nothing needs restoring there.
Recommended settings
We recommend keeping WPS Hide Login active until a sign-in at the shared address works, keeping See page not found for /wp-admin/, and storing the address beside your recovery link. A moved address keeps scripts that ask for wp-login.php away from the form, but anyone who finds the address meets the same form, so keep Sign-in attempt limits on and set up two-factor or passkeys too. If you change the address later, Try It in Test Mode counts real requests before anything is blocked. Change the sign-in address describes every option on the row.
Frequently asked questions
Does BetterShield change WPS Hide Login during the import?
No. BetterShield reads the settings WPS Hide Login left on the site and does not change or deactivate it. Importing the address and deactivating the plugin are separate actions, and you choose when to do the second.
Will my current login URL keep working?
Yes, when BetterShield can use it: 1 to 200 letters, numbers, dashes and underscores, and not a name WordPress already uses or your decoy URL. Preview Import shows whether it comes over before anything changes.
Can I run both plugins at the same time?
For a short while, yes. While both are active, they answer at the same address, which is what lets you test before WPS Hide Login is switched off. We recommend finishing the switch rather than leaving both on.
What if I forget the new address?
Use your recovery link, a recovery code or wp bettershield recover. Safe mode turns on for an hour and wp-login.php answers again. Once you are in, the row shows the address with Copy. Locked out walks through each way back in.
Can I go back if something looks wrong?
Yes. Turn off Custom sign-in address and Dashboard privacy for visitors on Protection › Login & Access, and reactivate WPS Hide Login from the Plugins screen if you want its own behavior back.
Conclusion
Switching from WPS Hide Login comes down to a short order: keep a way back in, preview the import, apply the address, test a sign-in while both plugins are active and only then deactivate WPS Hide Login. The import carries what matches and says plainly what does not, and every change can be taken back.
BetterShield is free on WordPress.org. The step-by-step reference is Switch from WPS Hide Login to BetterShield.